1What you’re looking at
Those chalky white spots and crusty rings are minerals left behind as water evaporates. They build up a little more every day, which is why a quick wipe stops working after a while. Minerals dissolve in mild acid, so that’s what we use.
2The everyday fix: white vinegar
For glass shower doors, faucets, chrome and ceramic tile:
- Mix equal parts white vinegar and water in a spray bottle
- Spray the spots and let it sit for 5 to 10 minutes
- Wipe with a microfiber cloth; use a soft brush on faucet edges
- Rinse with clean water and dry completely
- For crusty faucets, wrap them in a vinegar-soaked paper towel for 15 to 30 minutes first
3Never use vinegar on natural stone
Acids like vinegar and lemon can dull or etch marble, travertine, limestone and other natural stone, and can wear down the sealer on granite. For stone counters, showers and floors, use a pH-neutral cleaner made for stone.
Not sure what your counters are made of? Test any cleaner on a small hidden spot first.
4Never mix cleaners
Don’t combine vinegar with bleach or bleach-based products. Mixing them releases chlorine gas, which is dangerous to breathe. Use one product at a time and rinse in between.
5Keep the spots from coming back
A few seconds after each use saves a lot of scrubbing later.
- Squeegee the shower glass after every shower
- Wipe faucets dry after you use them
- Run a towel over the sink and backsplash at the end of the day
- Ask a plumber whether a water softener makes sense for your home
6When the spots won’t budge
Years of build-up can etch into glass and fixtures, leaving a cloudy patch that no cleaner can lift. If spots stay after a careful clean, the surface itself has changed. That’s worth knowing before you scrub harder and risk scratching it.
Our Deep Clean gives hard-water spots extra time. We’ll always tell you honestly if build-up is permanent.
General guidance only. Always follow the care instructions for your surfaces and products, and test cleaners on a small hidden spot first.